大富彩票平台

您好,欢迎来到济南新雄经贸大富彩票平台官方网站!

400-0616-756

大富彩票平台

companynews

产品中心
当前位置: 大富彩票平台-大富彩票平台-大富彩票平台-不锈钢法兰采用高压垫圈是为了什么?

不锈钢法兰采用高压垫圈是为了什么?

来源:http://www.n-impact20.com

【 发布于:2019-12-31 16:22:21 】


大富彩票平台  不锈钢法兰的主页在应用程序中使用高压不锈钢法兰垫圈的使用必须使用高压垫圈,不仅可以增加法兰密封的程度,也极大地提高性能的法兰,下面对高压垫圈的简单介绍,一般的橡胶垫适用于一般使用环境温度低于120℃,石棉橡胶垫片适用于一般使用蒸汽温度低于450℃的环境下工作时,油温低于350℃,压力不高于5 mpa工作环境,耐酸石棉板可以抵抗腐蚀介质的干扰,在高压管道工程,10与铝、铜、钢、不锈钢或其他形状的金属垫片。

  The home page of stainless steel flange uses the high-pressure stainless steel flange gasket in the application program. The high-pressure gasket must be used, which can not only increase the degree of flange sealing, but also greatly improve the performance of the flange. The following is a brief introduction of the high-pressure gasket. The general rubber gasket is suitable for the general use of the ambient temperature lower than 120 ℃, and the asbestos rubber gasket is suitable for the general use of the steam temperature lower than 450 ℃ When working in the environment of, oil temperature is lower than 350 ℃, pressure is not higher than 5 MPa, acid resistant asbestos plate can resist the interference of corrosive medium, in high-pressure pipeline engineering, 10 with aluminum, copper, steel, stainless steel or other shapes of metal gasket.

济南镀锌管

  高压垫片与密封面之间的接触宽度意味着线接触很窄,密封面与密封面的加工光洁度很高。低压法兰用小直径和丝质连接,高压法兰和低压法兰用大直径焊接比较好,能承受不同压力的法兰厚度和连接螺栓的直径和数量不一样。

  The contact width between the high-pressure gasket and the sealing surface means that the line contact is very narrow, and the machining finish between the sealing surface and the sealing surface is very high. Low pressure flange is connected with small diameter and silk, high pressure flange and low pressure flange are better welded with large diameter, flange thickness that can bear different pressure and diameter and quantity of connecting bolt are different.

  以上是济南镀锌管厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www。jnxxjm。comThe above is the relevant content introduced by Jinan galvanized pipe manufacturer。 For more information, please visit the website: http://www。jnxxjm。com



上一篇:卷制法兰的模具接触工件是用来做什么的?
下一篇:异型法兰怎么加工使用大家知道吗?
云南11选5玩法规则 云南11选5开奖结果 云南11选5走势图 大富彩票平台云南11选5免费计划软件 云南11选5开奖结果 云南11选5走势图 大河彩票登陆 云南11选5走势图 云南11选5走势图 彩六彩票